Home / NASA / NASA-STD / NASA-STD-5006

NASA-STD-5006 — General Welding Requirements for Aerospace Materials (A w/CHANGE 2)

NASA-STD-5006 is listed as current Current
in the NASA Technical Standards (NTSS) catalog as of our last index refresh (2026-08-23). Status is mirrored from that catalog, re-checked weekly — every change is logged. Note: its publication date is 2015-07-31 — 11.1 years old — so check for newer interim changes before citing it.

Branch	NASA
Series	NASA-STD
Publication date	2015-07-31 (11.1 years ago)
Status	Current
Proponent / OPR	NASA Technical Standards Program
Source of record	NASA Technical Standards (NTSS)

Open the document Official document (NASA Technical Standards (NTSS))

Watch this publication

Get an email if NASA-STD-5006 is revised, superseded, or rescinded.

Nearby in the NASA-STD series

NASA-STD-5001 — Structural Design and Test Factors of Safety for Spaceflight Hardware (B w/CHANGE 3) Current
NASA-STD-5002 — Load Analyses of Spacecraft and Payloads (B) Current
NASA-STD-5005 — Standard for The Design and Fabrication of Ground Support Equipment (D w/CHANGE 2) Current
NASA-STD-5008 — Protective Coating of Carbon Steel, Stainless Steel, and Aluminum on Launch Structures, Facilities, and Ground Support Equipment (B w/CHANGE 2) Current
NASA-STD-5009 — Nondestructive Evaluation Requirements for Fracture Critical Metallic Components (C) Current

This is an unofficial index built from the public catalog. The controlling copy is always the one on NASA Technical Standards (NTSS) — verify there before citing NASA-STD-5006 in an official product.